WIP PRODUCTS
We manufacture a wide range of flux coated welding electrodes for various applications. Click on a category to explore.
- ▸ Aluminum Electrodes
- ▸ Bronze and Bronze Alloy
- ▸ Cast Iron Electrodes
- ▸ Cutting and Chamfering Rods
- ▸ Hardsurfacing Electrodes
- ▮ Low Hydrogen and Low Alloy Electrodes
- ▸ Mild Steel Electrodes
- ▸ Stainless Steel Electrodes
- ▸ Submerged Arc Wires and Fluxes
- ▸ TIG Filler Wires
- WIPWeld 16 (AWS E7016)
- WIPWeld Premier (AWS E7016-1)
- WIPWeld 18 (AWS E7018)
- WIPWeld Superflex (AWS E7018-1)
- WIPWeld 10 Mo (AWS E7010-A1)
- WIPWeld TenaCord 70Mo (AWS E7018-A1)
- ▮ WIPWeld Chromol (AWS E8015-B6)
- WIPWeld E8018-G (AWS E8018-G)
- WIPWeld E8018-B2 (AWS E8018-B2)
- WIPWeld E8018-C1 (AWS E8018-C1)
- WIPWeld E8018-C3 (AWS E8018-C3)
- WIPWeld CrMO (AWS - E9018-B3)
- WIPWeld TenaCord 110 (AWS - E11018-G)
An all-position DC+ electrode with low spatter loss and easy slag removal electrode. Weld deposit contains 5% chromium and 0.5% molybdenum.
Applications and Directions
Best suited for welding creep-resisting, low alloy steels used for high temperature and high pressure service which are met in the construction and maintenance of modern power stations, oil and chemical plants
Recommended Settings
Welding Current
DC+
Size (mm/In)
3.2 / 1/8
4.0 / 5/32
Amperage (A)
100-140
130-180
Typical Mechanical Properties
Tensile Strength (MPa)
600-700
Yield Point (MPa)
460
Elongation in 5xD
19%
Elongation in 50mm
-
Charpy-V Impact at -59°C (J)
-
Charpy-V Impact at -45°C (J)
-
Charpy-V Impact at -40°C (J)
-
Charpy-V Impact at -29°C (J)
-
Charpy-V Impact at -20°C (J)
-
Charpy-V Impact at 20°C (J)
≥ 100
Chemical Analysis
C 0.044 | Mn 0.588 | Si 0.155 | S 0.011 | P 0.010 | Ni 0.061 | Cr 6.157 | Mo 0.500 | W 0.161 | V 0.015