We manufacture a wide range of flux coated welding electrodes for various applications. Click on a category to explore.
- ▸ Aluminum Electrodes
- ▸ Bronze and Bronze Alloy
- ▸ Cast Iron Electrodes
- ▸ Cutting and Chamfering Rods
- ▸ Hardsurfacing Electrodes
- ▸ Low Hydrogen and Low Alloy Electrodes
- ▮ Mild Steel Electrodes
- ▸ Stainless Steel Electrodes
- ▸ Submerged Arc Wires and Fluxes
- ▸ TIG Filler Wires
- ▮ WIPWeld 10 (AWS E6010)
- WIPWeld 11 (AWS E6011)
- WIPWeld 1100 (AWS E6011)
- WIPWeld 12 (AWS E6012)
- WIPWeld 1200 (AWS E6012)
- WIPWeld FerroCord (AWS E6012)
- WIPWeld GenCord (AWS E6013)
- WIPWeld 1300 (AWS E6013)
- WIPWeld WipCord (AWS E6013)
- WIPStar (AWS E6013)
- WIPWeld FlexCord 19 (AWS E6019)
- WIPWeld 24 SpeedCord (AWS E7024)
- WIPWeld GalvaCord
- WIPweld Cellofil (AWS E6010)
An all-position deep-penetration electrode with a spray-type arc, flat bead, thin brittle slag. Weld deposit has high tensile strength and ductility and is of X-ray quality. Excellent weldability in vertical and overhead positions. Deposition efficiency higher than competitive types due to the presence of iron powder in the coating
Det Norske Veritas (DnV) : Grade 3
Lloyds Register of Shipping (LR): Grade 3m
Storage tanks, boilers, pipes, galvanized plates, structural steels, refinery structures, oil well casings, fabrications of heavy equipment, shipbuilding, etc.
Use DC reverse polarity (DC+) current. Maintain a short to medium arc. Hold perpendicular to the work surface and slightly incline in the direction of travel, keeping size of the molten pool small. Do not allow coating to touch pool. Clean each bead thoroughly before applying the next. Vertical welding can be done starting from the top or the bottom as the work requires. In overhead welding, best results are obtained by the multiple bead method.
DC+
3.2 / 1/8
4.0 / 5/32
5.0 / 3/16
6.0 / 15/64
80-110
100-150
140-200
220-350
450-540
25-30%
60
-
365-460
-
90
C 0.09 | Mn 0.4 | Si 0.2