WIP PRODUCTS
We manufacture a wide range of flux coated welding electrodes for various applications. Click on a category to explore.
- ▸ Aluminum Electrodes
- ▸ Bronze and Bronze Alloy
- ▸ Cast Iron Electrodes
- ▸ Cutting and Chamfering Rods
- ▸ Hardsurfacing Electrodes
- ▸ Low Hydrogen and Low Alloy Electrodes
- ▮ Mild Steel Electrodes
- ▸ Stainless Steel Electrodes
- ▸ Submerged Arc Wires and Fluxes
- ▸ TIG Filler Wires
- WIPWeld 10 (AWS E6010)
- WIPWeld 11 (AWS E6011)
- WIPWeld 1100 (AWS E6011)
- WIPWeld 12 (AWS E6012)
- WIPWeld 1200 (AWS E6012)
- WIPWeld FerroCord (AWS E6012)
- WIPWeld GenCord (AWS E6013)
- WIPWeld 1300 (AWS E6013)
- WIPWeld WipCord (AWS E6013)
- ▮ WIPStar (AWS E6013)
- WIPWeld FlexCord 19 (AWS E6019)
- WIPWeld 24 SpeedCord (AWS E7024)
- WIPWeld GalvaCord
- WIPweld Cellofil (AWS E6010)
A general-purpose easy-to-weld electrode for fabrication and repair of mild steel structures. The electrode has a fine, smooth bead and readily detachable slag. Striking and restriking is relatively easy.
Applications and Directions
Best recommended for fabrication and repair of thin and medium steel structures for assembly of auto frames and bodies, sheet metal works, small to medium-sized tanks, window frames, ornamental iron works, etc. Also suitable for tack welding and intermittent and fillet welding.
Recommended Settings
Welding Current
AC or DC (both polarities)
Size (mm/In)
2.5 / 3/32
3.2 / 1/8
4.0 / 5/32
Amperage (A)
60-90
90-130
130-180
Typical Mechanical Properties
Tensile Strength (MPa)
475
Elongation in 50mm
25%
Charpy-V Impact at -29°C (J)
-
Charpy-V Impact at 0°C (J)
75
Yield Point (MPa)
430
Charpy-V Impact at -30°C (J)
-
Charpy-V Impact at -20°C (J)
-
Chemical Analysis
C 0.09 | MG 0.30 | Si 0.20