WIP PRODUCTS

We manufacture a wide range of flux coated welding electrodes for various applications. Click on a category to explore.
- ▸ Aluminum Electrodes
- ▸ Bronze and Bronze Alloy
- ▸ Cast Iron Electrodes
- ▸ Cutting and Chamfering Rods
- ▸ Hardsurfacing Electrodes
- ▸ Low Hydrogen and Low Alloy Electrodes
- ▸ Mild Steel Electrodes
- ▸ Stainless Steel Electrodes
- ▸ Submerged Arc Wires and Fluxes
- ▮ TIG Filler Wires
An extra-low carbon content filler rod stabilized against intergranular corrosion. The weld deposit is corrosion and scale resistant with oxidizing combustion gas up to 800 C.
Applications and Directions
For use in TIG welding of Cr-Ni steels e.g. V2A, AISi 304, 308, 308L, En 58A,B,C, Ugine NS22, Avesta 832 MV, Soderfors 553, Sandvik 6R10, Sandvik OR2, UHB stainless 3, Staybright FSL, Silver Fox 304, etc. For fusion welding plates, sections, containers, pipes, etc.
Tensile Strength (MPa)
540-640
Yield Point (MPa)
300-360
Elongation
35-45%
Melting range (°C)
-
Charpy-V Impact at -20°C (J)
-
Chemical Analysis
C 0.03 | Si 0.015 | Mn 1.92 | Ni 9.79 | Cr 19.73 | Mo 0.17 | S 0.02 | P 0.01 | Fe 64.50 | Inerts 3.81