We manufacture a wide range of flux coated welding electrodes for various applications. Click on a category to explore.
- ▸ Aluminum Electrodes
- ▸ Bronze and Bronze Alloy
- ▸ Cast Iron Electrodes
- ▸ Cutting and Chamfering Rods
- ▸ Hardsurfacing Electrodes
- ▸ Low Hydrogen and Low Alloy Electrodes
- ▸ Mild Steel Electrodes
- ▮ Stainless Steel Electrodes
- ▸ Submerged Arc Wires and Fluxes
- ▸ TIG Filler Wires
- ▮ WIPWeld Stain Arc 308 (AWS E308-16)
- WIPWeld 308L (AWS - E308L-16)
- WIPWeld 309L (AWS - E309L-16)
- WIPWeld 309MoL (AWS E309Mol-16)
- WIPWeld 310 (AWS E310-16)
- WIPWeld 312 (AWS E312-16)
- WIPWeld Versacrom (AWS E312-16)
- WIPWeld WipCrom 312 (AWS E312-16)
- WIPWeld 316 (AWS E316-16)
- WIPWeld 316L (AWS E316L-16)
- WIPWeld 347Cb (AWS E347-16)
- MangaCrom E307-16
A rutile type electrode giving stainless austenitic weld metal containing approximately 18% Cr and 8% Ni. The striking and re-striking of the electrode is remarkably easy. Slag detachability is very good and the risk of porosity in the weld is minimal provided the electrode is dry. The smaller sizes including 3.25 mm are suitable for positional welding while the bigger sizes are for flat only.
Highly recommended for general repair work and fabrication of stainless steel equipment such as containers, tanks, vats and other equipment used in the dairy, chemical and food industries, Also ideal as protective overlay steel where medium hardness and corrosion resistance is required.
AC or DC+ (≥65 OCV)
1.6 / 1/16
2.0 / 5/64
2.5 / 3/32
3.2 / 1/8
4.0 / 5/32
25-35
30-60
50-80
80-120
140-160
550
48%
-
420
-
C 0.04 | Mn 0.59 | Si 0.55 | Ni 9 | Cr 18