WIP PRODUCTS
We manufacture a wide range of flux coated welding electrodes for various applications. Click on a category to explore.
- ▸ Aluminum Electrodes
- ▸ Bronze and Bronze Alloy
- ▸ Cast Iron Electrodes
- ▸ Cutting and Chamfering Rods
- ▸ Hardsurfacing Electrodes
- ▮ Low Hydrogen and Low Alloy Electrodes
- ▸ Mild Steel Electrodes
- ▸ Stainless Steel Electrodes
- ▸ Submerged Arc Wires and Fluxes
- ▸ TIG Filler Wires
- WIPWeld 16 (AWS E7016)
- WIPWeld Premier (AWS E7016-1)
- WIPWeld 18 (AWS E7018)
- WIPWeld Superflex (AWS E7018-1)
- WIPWeld 10 Mo (AWS E7010-A1)
- WIPWeld TenaCord 70Mo (AWS E7018-A1)
- WIPWeld Chromol (AWS E8015-B6)
- WIPWeld E8018-G (AWS E8018-G)
- WIPWeld E8018-B2 (AWS E8018-B2)
- WIPWeld E8018-C1 (AWS E8018-C1)
- WIPWeld E8018-C3 (AWS E8018-C3)
- WIPWeld CrMO (AWS - E9018-B3)
- ▮ WIPWeld TenaCord 110 (AWS - E11018-G)
Basic coated electrode for high tensile fine-grained structural steels. Good weldability in all positions. Low spatter loss. Easy slag removal. Regular seams, high crack resistance. Specific characteristics of coating make diameters up to 3.25 mm suitable for root passes.
Applications and Directions
Suitable for heat- treated fine grained structural steels as N-A-XTRA 75, TI, TIA, TIB, HSB 77, N-A-XTRA 70, etc.
Recommended Settings
Welding Current
DC+
Size (mm/In)
3.2 / 1/8
4.0 / 5/32
Amperage (A)
90 - 135
140-185
Typical Mechanical Properties
Tensile Strength (MPa)
760-790
Yield Point (MPa)
720 (min)
Elongation in 5xD
16% (min)
Elongation in 50mm
-
Charpy-V Impact at -59°C (J)
-
Charpy-V Impact at -45°C (J)
-
Charpy-V Impact at -40°C (J)
-
Charpy-V Impact at -29°C (J)
-
Charpy-V Impact at -20°C (J)
-
Charpy-V Impact at 20°C (J)
-
Chemical Analysis
C 0.06 | Mn 1.70 | Si 0.30 | S 0.02 Max | P 0.02 Max | Ni 2.0 | Cr 0.50 | Mo 0.35