We manufacture a wide range of flux coated welding electrodes for various applications. Click on a category to explore.
- ▸ Aluminum Electrodes
- ▸ Bronze and Bronze Alloy
- ▸ Cast Iron Electrodes
- ▸ Cutting and Chamfering Rods
- ▸ Hardsurfacing Electrodes
- ▸ Low Hydrogen and Low Alloy Electrodes
- ▮ Mild Steel Electrodes
- ▸ Stainless Steel Electrodes
- ▸ Submerged Arc Wires and Fluxes
- ▸ TIG Filler Wires
- WIPWeld 10 (AWS E6010)
- WIPWeld 11 (AWS E6011)
- WIPWeld 1100 (AWS E6011)
- WIPWeld 12 (AWS E6012)
- WIPWeld 1200 (AWS E6012)
- ▮ WIPWeld FerroCord (AWS E6012)
- WIPWeld GenCord (AWS E6013)
- WIPWeld 1300 (AWS E6013)
- WIPWeld WipCord (AWS E6013)
- WIPStar (AWS E6013)
- WIPWeld FlexCord 19 (AWS E6019)
- WIPWeld 24 SpeedCord (AWS E7024)
- WIPWeld GalvaCord
- WIPweld Cellofil (AWS E6010)
An easy to weld rutile-type electrode for general construction and repair of mild steel machinery and equipment. Weldability in all positions is easy, the slag is easy to remove, and weld bead is smooth. Striking and re-striking is relatively easy and is therefore an ideal electrode for tacking.
Suited for sheet metals construction, plumbing works, metal furnishes, and for bridging gaps on poor fit-up joints
Use either AC or DC straight polarity (DC-) current. Hold short arc and keep the size of the molten pool small and regular. Welding upward is recommended for vertical position, although welding may be done from top to bottom on lighter metal using small-size electrodes (3.25mm or smaller). In overhead welding use small-size electrodes with little weaving
AC or DC-
2.5 / 3/32
3.2 / 1/8
4.0 / 5/32
5.0 / 3/16
60-90
90-140
130-180
120-230
475
25%
-
80
440
-
-
C 0.07 | Mn 0.24 | Si 0.20